All About Art Clay™

Shop

Education

GCAC

My Account







  Home > Online Store > Clay >

Goldie Bronze™ Soft Powder 50g



 
Alternative Views:


Our Price: $12.50

Quantity in Stock:68
Product Code: GC-03
Qty:

Description
 
(Item # GC-03) Goldie Bronze™ Soft Powder 50 gm

Goldie Bronze™ is bronze of a beautiful goldencolor, which is very hard after firing. It contains approximately 90% copper and 10% tin. The binders are organic and non toxic. Goldie Bronze™ shrinks by about 8%-11% on firing, depending on the shape and the size of the piece. Dried clay can be ground up to a powder and reconstituted. SOFT is very soft and is ideal for working with stamps and textures, and to capture fine details. Both types may be mixed in the powder stage, before adding your water. If you are planning to create a piece which involves fine details and you desire the maximum strength, it is recommended to mix equal portions of both the Hard and the Soft versions.

TO MIX:
  • First, stir the powdered clay well in its original container, to ensure it is properly mixed, and then put the desired amount of powder into a smaller container.
  • Add about a dozen drops of water or spray in a little water and mix with a knife or spoon, adding more water as required, until you get a clay of a plasticine like consistency.
  • Roll the lump clay out thinly and fold over. Roll again, rolling away from the fold. Repeat this action several times. This is very important to ensure that all the air is removed from the clay and to get a smooth consistency before using. Insert into a plastic bag or container and wait for 30 minutes.

    TO USE:
  • To join elements in Goldie Bronze™ clay mix a little powder with water to make a paste. Elements can also be joined with the water only method in the same way as silver clay.
  • Pieces can be dried naturally or by using heat, e.g. on a hotplate or in a dehydrator. Dry at 195°F; or lower. Higher temperatures may cause cracking, and the creation of steam bubbles.
  • Remember to always clean your tools well between using different types of metal clay to avoid cross contamination. The above comment does not apply to metals from the Goldie Metal™ line, because you can mix them together with Mokume Gane, or other techniques.

    TO FIRE:
  • Ensure the clay is completely dry before firing. Any moisture will boil and ruin the piece.
  • Lay the pieces in a stainless steel firing container on a layer of activated coconut shell carbon with a minimum depth 1cm (1/2”) under the pieces. Make sure the pieces are at least 1cm (1/2”) apart. Place the open container into a cold kiln and fire at full ramp to 670°F and hold for 30 minutes.

    SAFETY PRECAUTIONS:
    Do not breathe in the powder or ingest Goldie Clay™. Always use the appropriate safety equipment when working with a hot kiln and fire in a well ventilated area. Goldie Clay™ is non toxic and does not contain any harmful chemicals. There have been no reports of any allergic reaction to Goldie Clay™, however people with allergies should be aware of the possibility of a reaction and use with care.

    SAFETY PRECAUTIONS:
    Do not breathe in the powder or ingest Goldie Clay™. Always use the appropriate safety equipment when working with a hot kiln and fire in a well ventilated area. Goldie Clay™ is non toxic and does not contain any harmful chemicals. There have been no reports of any allergic reaction to Goldie Clay™, however people with allergies should be aware of the possibility of a reaction and use with care.

  • Goldie Bronze Manuel
    Goldie Firing Quick Reference
    MSDS for Goldie Bronze

    Share your knowledge of this product. Be the first to write a review »